My dyno run

[Gang Green]

Get my bike back later today so I don't have the printouts yet.

EDR just mapped my '06 ZX10 and I ran a 166.8 RWHP on there stingy dyno.
Not bad at all I'd say.
Engines mods include. PC3, BMC Race airfilter, airbox block-off with plumbing removed, A&R Exhaust Baffles, Removed Catayletic converter, GI ProW/TRE. He might have disconnected the exhaust butterfly when it was in there. Not sure yet.

Another fella that was mapped just before me got a 161 with Akraprovik slip-ons

[MEP1000]

:bow: :bow: Sweet... Now all thats missing is some sunshine and warm weather

[TOM-CAT]

:bow: :bow: Sweet... Now all thats missing is some sunshine and warm weather

+1:ride:

[kneedragger26]

What rev were you getting 167 RWHP?

[shaggy1]

holy ****, nice number

[v8zman]

i cant wait to ride it

[Nicegy525]

i cant wait to ride it

There I quoted you saying you actually wanted to ride a Kawi. You cant hide your true feelings! welcome to the non-gay side of life my friend! :thumbup: :lol:

[v8zman]

aw crap

[Nicegy525]

:yes: :lol: :wow8:

[MEP1000]

i cant wait to ride it

There I quoted you saying you actually wanted to ride a Kawi. You cant hide your true feelings! welcome to the non-gay side of life my friend! :thumbup: :lol:
V8 WHAT THE HELL WHERE YOU THINKING???? TAKE IT BACK QUICK

[v8zman]

stupid alcohol

i will never drink and talk about kawis again

[Jane Honda]

OMFG!!!!:hysterical:


I first read this as "my gyno run" :lol:

[MEP1000]

stupid alcohol

i will never drink and talk about kawis again


Just take the letter K out of your vocab when drinking and you will be fine :lol: :lol: :lol:

[MEP1000]

OMFG!!!!:hysterical:


I first read this as "my gyno run" :lol:


O man now that would be something to see

[v8zman]

ive seen that somewhere

[MEP1000]

ive seen that somewhere


Do tell :yes:

[Gang Green]

Ok, I was wrong.
Best run was 167.12 rwhp
83.5 ft. lbs. torque

Huge hole at 5000 to 6000 rpm's. Eric said nothing a full system wouldn't fix. That and 2 grand. It's crazy quick though.

[kneedragger26]

Ok, I was wrong.
Best run was 167.12 rwhp
83.5 ft. lbs. torque

Huge hole at 5000 to 6000 rpm's. Eric said nothing a full system wouldn't fix. That and 2 grand. It's crazy quick though.

OK. Check it out. I asked once but maybe not completely. Now I get technical.
Where are you getting 167 HP? At what RPM range.
If you look at the sheet there will be a place were torque and HP meet. Torque drops off and HP continues up to your max RPM, or in some cases its drops after a point in the RPM range.
The question is: Are you getting 167 HP at 84 lbs of torque?..... and what RPM range are the Torque and the HP meeting at?

I am interested.

[Toxxic]

OK. Check it out. I asked once but maybe not completely. Now I get technical.
Where are you getting 167 HP? At what RPM range.
If you look at the sheet there will be a place were torque and HP meet. Torque drops off and HP continues up to your max RPM, or in some cases its drops after a point in the RPM range.
The question is: Are you getting 167 HP at 84 lbs of torque?..... and what RPM range are the Torque and the HP meeting at?

I am interested.

I would be interested in that as well. I too had some upgrades to my bike, with very similar numbers 155 HP but 92 lbs of torque. What found to be the most interesting of the numbers was how quickly the bike now builds up to 100 HP. From just under 6 seconds, now 2.4 seconds. Now it is really quick!

[MEP1000]

Ok, I was wrong.
Best run was 167.12 rwhp
83.5 ft. lbs. torque

Huge hole at 5000 to 6000 rpm's. Eric said nothing a full system wouldn't fix. That and 2 grand. It's crazy quick though.


2000?? Ouch

[Vindizzle]

My R-1 has about the same mods. But I am only making 155rwhp cause some asshole drove my bike 100mph on 217 after putting the bike together at BHY. So I should have been stock at 155rwhp! I am pissed, but just wait till I get done with the Vette, that bike is next. I am going to make 200rwhp..LOL!!! No, I know I won't use it all and no I don't care..haha! Why have a .45 when you can have a Magnum...LOL! Thats the American way!!!

BTW, nice number, I am jealous!

[lobes]

So were are the dyno sheets?

[Flyte Risk]

OK. Check it out. I asked once but maybe not completely. Now I get technical.
Where are you getting 167 HP? At what RPM range.
If you look at the sheet there will be a place were torque and HP meet. Torque drops off and HP continues up to your max RPM, or in some cases its drops after a point in the RPM range.
The question is: Are you getting 167 HP at 84 lbs of torque?..... and what RPM range are the Torque and the HP meeting at?

I am interested.
What is it specifcally your asking?

hp and tq will always meet at 5250 rpm since hp is a measurement of tq.

[Flyte Risk]

So were are the dyno sheets?

Yeah, where are your dyno sheets Lobes?