PDA

View Full Version : Clear Alternatives lights


"b"
04-19-2007, 10:57 AM
Im looking in to getting the intragrated system but was wondering how those of you that have these deal with the license plate light or if you even worry about it? Maybe Im giving to much thought to being close to DOT standards. I just dont want to give any extra reason to get pulled over.

mopedmaniac
04-19-2007, 11:30 AM
I used bolt lights. http://www.customdynamics.com/illuminatorz_licence_plates.htm

these aren't the exact ones but the same damn thing.

Down near the bottom "Lite'N Boltz"


L

Fade
04-19-2007, 02:33 PM
oh neat..those are cool.

"b"
04-19-2007, 03:04 PM
http://clearalternatives.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=CA&Product_Code=CTL-0071-IT&Category_Code=R1


here is what im looking at.

poisonivyR1
04-19-2007, 04:33 PM
those work great i have one on my 06 R1
but i put LED flush mounts on the front now i gotta buy their flasher unit but the tail lights look sweet and are brighter than stock had one on my R6 befor it became track only never a problem with this prouduct

Xusia
04-19-2007, 04:46 PM
I don't have an integrator kit (which I will do next time). I got the Comptetion Werkes fender eliminator, which uses much smaller and closer turn signals and relocates my license plate. To date (over 3 years now), I have not been pulled over for license plate or turn signal violations, nor have I been ticketed for such when pulled over for any other reason. In fact, only 1 officer even MENTIONED that the license plate was a bit hard to read - absolutely nothing on the completely NOT street legal turn signals.

Based on this, I really don't think you need to worry much, but I would have SOME kind of light. Oh yeah, and according to MEP it has to be boring white...

RockstEdy
04-19-2007, 06:28 PM
Have this on mine

http://clearalternatives.com/Merchant2/graphics/00000001/CTL-0056-1.gif

made by http://www.hightechspeed.com/

MEP1000
04-19-2007, 06:30 PM
I don't have an integrator kit (which I will do next time). I got the Comptetion Werkes fender eliminator, which uses much smaller and closer turn signals and relocates my license plate. To date (over 3 years now), I have not been pulled over for license plate or turn signal violations, nor have I been ticketed for such when pulled over for any other reason. In fact, only 1 officer even MENTIONED that the license plate was a bit hard to read - absolutely nothing on the completely NOT street legal turn signals.

Based on this, I really don't think you need to worry much, but I would have SOME kind of light. Oh yeah, and according to MEP it has to be boring white...


Also according to The Mep your ass is getting a ticket :lol: :lol: :lol:

TOM-CAT
04-19-2007, 09:43 PM
Also according to The Mep your ass is getting a ticket :lol: :lol: :lol:

If just his ass gets the ticket, and he is a no show. Is the bench warrant for just his ass, or does the rest of him have to go to jail too. :laughing:

moose
04-19-2007, 10:55 PM
+ 1000 on the LITE N BOLTS!!! They look super clean and they are 2x brighter than the oem plate light. A very good choice!

MEP1000
04-19-2007, 11:12 PM
If just his ass gets the ticket, and he is a no show. Is the bench warrant for just his ass, or does the rest of him have to go to jail too. :laughing:


Just his ass, we don't want to overcrowd the jail system anymore than it already is :hysterical: :hysterical:

moose
04-19-2007, 11:25 PM
Dude... your ASS is going to jail!!!! Hope your ASS doesn't mind alternative lifestyles......

Xusia
04-24-2007, 06:54 AM
Dude... your ASS is going to jail!!!! Hope your ASS doesn't mind alternative lifestyles......

Just his ass, we don't want to overcrowd the jail system anymore than it already is :hysterical: :hysterical:

Whew! If it's just my ass no worries - it's small enough to fit between the bars!! Now, if my HEAD were included, I'd be screwed... :hysterical:

Jane Honda
04-24-2007, 07:16 AM
:hysterical:

MEP1000
04-24-2007, 07:52 AM
Whew! If it's just my ass no worries - it's small enough to fit between the bars!! Now, if my HEAD were included, I'd be screwed... :hysterical:


:lol: :lol:

Rev. Fatty Bulger
04-24-2007, 07:59 AM
Licence plate?

Xusia
04-24-2007, 10:25 AM
Licence plate?

My ass has no plate.

"b"
04-27-2007, 09:54 AM
i installed my light last night very easy maybe took 30min from start to finish.. It looks amazing!!!! what a great product!!!